TOMAR Off-Road Lighting -
a division of TOMAR Electronics, Inc. is an innovator and leading manufacturer of high quality, highly reliable and extremely efficient LED and strobe light systems with over 47 years experience in the explosion-proof, heavy industry and emergency vehicle markets.

Now TOMAR brings its years of experience to the Off-Road lighting market. The TRX series off-road LED lightbars set a new standard in performance, configurability and maintainability. All TOMAR products are designed, engineered, assembled and serviced in our state of the art, ENERGY STAR certified factory located in Gilbert, Arizona, USA.

Some of the unique features of Tomar’s TRX series lights include the following:

  • Low current switching eliminates the need for relays
  • Dimming capability
  • Field interchangeable lamp modules for customizable beam spread
  • True dual color amber white modules
  • Individual activation of spot and flood modules in the same lightbar
  • Individual activation of required running lights on properly configured models
  • SOS distress flash pattern
  • Available Lengths: 3”, 6”, 10”, 15”, 20”, 25”, 30”, 35”, 40”, 45", 50”, 60"

TRX series lightbars
are Water and Dust-Proof, and IP-68 and IP-69K rated. Each component of the TRX lightbar is individually waterproofed eliminating the need for a failure- prone external gasket. Each light module is hermetically sealed using linear vibration welding and a patented over-molded heat extraction technology. The internal control module is completely encapsulated in a urethane potting. Deutsch waterproof connectors are used for all external wire interconnects.

 

Internal Controller - provides power and control functionality to all lamp modules. Low current input lines means no additional relays are required. Up to five unique features can be activated with no additional hardware needed. Additionally, the controller provides a DC voltage feed to power all switches used to operate the lightbar.

Multiple Color Modules - True amber/white dual color modules mean you don't have to sacrifice white light intensity to have full amber capability. The TRX internal controller lets you change the lightbar from white to amber with the flip of a switch.

Dual Pattern Activation
- When running a TRX lightbar with two beam patterns the internal controller allows independent control of each beam pattern. No additional hardware to buy or install.

Running light override
- For those situations where a white light is required to the front at all times, switching the lightbar to all amber could mean trouble. The TRX internal controller provides an override setting that forces one lamp module to remain white while the others switch to amber.

Multiple Function Lightbars - The TRX series lightbars have the flexibility to adapt to any situation. Whether the situation requires steady amber lights, flashing amber lights, blue lights, stop/tail lights or turn signal lights the TRX series lightbars have it covered.
Dimming - All 20" and longer lightbars have built in dimming capability. With the flip of a switch the internal controller reduces the light output by 50%. The dim setting has no effect on stop/tail lamps or turn signal lamps.

Modular Design
In addition to making the TRX the most maintainable lightbar on the market the individually replaceable lamp modules make changing beam angles in the field a snap. Replacing a lamp module can be done in less than one minute by simply removing two screws, disconnecting the lamp at the waterproof connector and plugging in a new lamp. The basic building blocks of the TRX lightbar are 3" and 6" lamp modules. Lamp modules are available in the following configurations:

Extreme Performance

  • Input Voltage: The standard TRX series operates on 12Vdc -24Vdc. 36Vdc - 48Vdc versions also available. TRT Models 12Vdc only.
  • Operating Temperature: -40° C to +60° C.
  • Waterproof - IP68 and IP69K rated, immersion tested to 9 meters.
  • Cree® XP-L LED's with L70 lifetime >36,300 Hours.
  • Salt-Fog Tested for corrosion resistance.
  • SAE-J575 Vibration Tested.
  • EMI/RFI protected.
  • Reverse polarity protected.

Peak Beam Intensity

  • The maximum luminous intensity typically along the central axis of a cone of light.
  • This measures the brightest part of the beam. The value is reported in candela and does not change with distance.

Beam Distance

  • The distance from the device at which the light beam is 0.25 lux. Results are reported in meters.
  • The Inverse Square Law is used to calculate the beam distance to 0.25 lux. 0.25 lux is approximately the equivalent of the light emitted from the full moon "on a clear night in an open field".

Light Output

  • A measurement of the total quantity of emitted overall light energy as measured by integrating the entire angular output of the portable light source.
  • The value is reported in lumens. Light Output is the total luminous flux.

Water Proof

  • Submersible-lP68-lngress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be stated by the manufacturer, but which are more severe than for IPX7.
  • lP69K Protected against close-range, high temperature, high pressure spray downs.

Register and stay in touch with Tomar Performance Lighting
for Updates, Specials, Upcoming Events, or to send a Comment or Inquiry.

TOMAR Off-Road Lighting is now offering product sponsorships!
Click here and fill out our Sponsorship Form.


TOMAR Electronics Inc.
2100 W. Obispo Avenue
Gilbert, Arizona 85233 USA
www.tomar.com

800.338.3133 Telephone
480.497.4400 Telephone
800.688.6627 Fax
480.497.4416 Fax

- About TOMAR
- TRX Product Warranty

Copyright ? 2016 - Tomar Electronics Inc. - All rights reserved