MICROSTROBE® IV Beacons - DC Power

  • The MICROSTROBE® is a low profile, single flash, low cost strobe light which features a plug-in replaceable lamp and Lexan® lens.
  • SKU: 470SSGP-1280-A
  • Regular price MSRP: $182.45
  • YOUR PRICE: $164.21

PRODUCT OVERVIEW

The MICROSTROBE® is a low profile, single flash, low cost strobe light which features a plug-in replaceable lamp and Lexan® lens. The high efficiency, solid state, power supply is fully potted in polyurethane for the ultimate in protection from moisture, vibration and exposure to high voltage. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages.

NOTE:
THIS IS A DC POWERED MICROSTROBE™

Model Numbers

  • Model No. 470SSGP–1280 - Description: DC strobe, wall plate mount - Voltage: 12 – 80VDC
  • Model No. 470S–1280 - Description: DC strobe, surface mount - Voltage: 12 – 80VDC
  • Model No. 470SMB–1280 - Description: DC strobe, magnetic mount and 6’ straight cord - Voltage: 12 – 80VDC
  • Model No. 470SMB–1280/CC - Description: DC strobe, magnetic mount and coil cord - Voltage: 12 – 80VDC
  • Model No. 490S–1280 - Description: DC strobe, 1/2” female pipe mount - Voltage: 12 – 80VDC
  • Model No. 492S–1280 - Description: DC strobe, 3/4” IPS slip mount - Voltage: 12 – 80VDC
    Note**- This product is NOT threaded.
  • Model No. 495S–1280 - Description: DC strobe, 1/2” male thread mount - Voltage: 12 – 80VDC

Key Features

  • Built-in RFI filters
  • Lens has hermetic O-ring seal
  • Solid state power supply
  • Available in amber, blue, clear, green, purple, and red
  • 2 year warranty on power supply
  • 1 year warranty on lamp
  • UL listed (all models)
  • NEMA 4X

Specifications

  • Flash Rate: 60 to 80 flashes per minute
  • Light Output: 50 effective candlepower (ECP)*
  • Voltage and Amperage:
    • 12-80VDC draws 0.4A average @ 12VDC tapering to 0.05A average @ 80VDC
    • 16-24VAC draws 0.35A average
  • Power Supply Output: 2.7 Watts 1.9 joules per flash. 190,000 Peak Candlepower**
  • Size and Weight: 5” tall x 3” dia. x 0.6 lbs ( 127mm x 76mm x 0.27kg )
  • Operating Temperature: -40°C to 65°C
  • Encapsulation: Fully potted in urethane material with no exposure to High Voltage possible

Architect and Engineer Specifications

The strobe light shall be Tomar model number series 470, 480, 485, 490,492, 495 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe tube. The strobe light must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. Voltage ranges shall be 12-80VDC or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall be UL listed and of NEMA 4X type weatherproof design with screw-on Lexan® lens.

NOTES
*ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a flashing light during its light pulse.

Helpful Links