iLED Series Externally Controlled

Ordering Note for Dual-Mode iLED’s: The iLED has the ability to be programmed to four distinct functions, using the red;blue;red and blue; and white wires as triggers. The white wire is a steady-burn only function, and defaults to the last color ordered (color 2 on dual-color lamps and color 3 on tri-color lamps). If the iLED is being used for both Warning and Scene Light Functions, white should be selected as the last color, to save programming time.

$94.15$128.39

Description

Externally controlled lamps have been pre-programmed to Direct Control Mode (steady-burn which bypassing the internal flasher) for use in systems where a centralized controller is controlling the timing of the warning lights.  For single color lamps, the primary wire activates the steady-burn.  For dual-color lamps, the primary wire activates the steady-burn of the first color, and the secondary wire activates the secondary color.  The lamps can be controlled by competitive products which can meet draw requirements and provide a 12-24 +VDC flash signal.


Included:
  • Black or Chrome surface mount bezels
  • 5 Year No Hassle Warranty
  • Patented Waterproof Design
  • SAE and CA 13 Compliant
  • Programmable Patterns and Flash Rates
  • Sync with other TOMAR products
  • Program up to 3 different warning modes
  • Programmable single color override (additional scene-light)

Horizontal Mount

Horizontal mount incorporates a wide-angle footprint bound to get the attention of motorists.

 


LED light

Vertical Mount

Our engineers designed a wide angle vertical optic that has an output similar to a horizontal lens.

 


13 Degree Angled Mount

Vertical and Horizontal lens to direct light out at 13 degrees. No angled brackets required!

 

 

Specifications

iLED Lamp NFPA Information Sheet

Warning Lamps:

Dual Color Warning:     
RECT-SDH-**                   Dual Color Warning, Clear Lens, Horizontal Mount
RECT-SDH13-**               Dual Color Warning, Clear Lens, Horizontal Mount, 13° Down Angle
RECT-SDV-**                   Dual Color Warning, Clear Lens, Vertical Mount
RECT-SDV13-**               Dual Color Warning, Clear Lens, Vertical Mount, 13° Down Angle

Triple Color Warning:
RECT-STH-***                 Triple Color Warning, Clear Lens, Horizontal Mount
RECT-STH13-***             Triple Color Warning, Clear Lens, Horizontal Mount, 13° Down Angle
RECT-STV-***                  Triple Color Warning, Clear Lens, Vertical Mount
RECT-STV13-***             Dual Color Warning, Clear Lens, Vertical Mount, 13° Down Angle

Color Choices:                Amber, Blue, Green Red, White

Lamp Bezels:
RECT-SX-BLACK              Black Lexan Bezel for iLed Lamp
RECT-SX-CHROME         Chrome Coated ABS Bezel for iLed Lamp

Dimensions:

Wiring Details:

BLACK                                Connect to GROUND
YELLOW                            Sync/Enter Programming Mode/Pattern Select
RED                                    Mode 1 flash pattern
BLUE                                  Mode 2 flash pattern
RED & BLUE                      Mode 3 flash pattern
WHITE                               Steady Burn

Amp Draw:

Mode                                                                                                   12.8 Vdc
Steady Blue                                                                                       0.75A
Steady Red                                                                                        0.57A
Steady White                                                                                    0.78A
Mode 1 default (neobe 150 phase 0, Red LED)                        0.21A
Mode 2 default (neobe 75 phase 0, Blue LED)                         0.28A
Mode 3 default (single 120 phase 0, White LED)                    0.40A

NFPA 1901 Cumulative Lamp Totals Candela Seconds per Minute:

Color Single Double Neobe
Amber 225,870 112,935 158,109
Blue 200,520 100,260 140,364
Red 232,703 116,351 162,892
White 260,858 130,429 182,600

Documents

Instruction Sheet’s for Pre-Programmed iLEDs

Dual iLED Instruction Sheet
Triple iLED Instruction Sheet