iLED Single Color Warning Dual-Mode

Ordering Note for Dual-Mode iLED’s: All Dual-Mode iLEDs include White LEDs triggered by the white wire as steady-burn scene lights.  If the order includes two different warning colors other than white, white is automatically added for a tri-color lamp.

$111.28 $123.64


Pre-Programmed Warning and Dual-Mode iLED’s feature four programmable functions, but come preset to the following:

Red wire: Warning Mode 1 (color 1)

Blue Wire: Warning Mode 2 (colors 1 and 2)

Red and Blue Wires: Warning Mode 3 (colors 1 and 2)

White Wire: Scene function (steady burn white LEDs)

More about Pre-Programmed Warning Pairs and Dual-Mode:

TOMAR’s pre-programmed Warning Pairs are designed to be plug-and play lamps which meet SAE, NFPA 1901 and 1906, and CA-13 requirements for emergency vehicles.  The lamps are grouped in “pairs” by the end two digits. For example, a R37D-W-RW-01 and a R37D-W-RW-02 are opposite phases of each other.  This means, when powered at the same time (such as the vehicle’s master emergency mode being activated), the lamps will flash at opposite timing.  For dual-color lamps which have no “off” time, they flash opposite colors of each other.  This makes installation of TOMAR’s warning lights simple, without the need for timely programming!



TOMAR’s Dual-Mode lamps work as hard as you do! These are full-color warning lamps which override to full-white work/scene lights.  No split colors here! With TOMAR’s advanced Clear Vision Optics, we can effectively transform every one of your warning lights into power, steady-burn white lamps for additional scene lighting.  This has been especially popular in rural or wildland areas.  These lamps come pre-programmed to flash and meet SAE, NFPA 1901 and 1906, and CA-13 requirements for emergency vehicles with the primary wire; and steady burn with the secondary wire.  No programming needed means your vehicle is up and running faster!


iLED™The most functional dual and tri-color LED light in the industry

Dominate your safety using warning, illumination, and design! The iLED™ series delivers unprecedented functionality in an extremely rugged platform unlike anything else in the industry. It provides the best option to keep you and your team safe, even in the worst lighting conditions. Adaptable for a variety of applications from POVs to tactical vehicles. Respond to and Illuminate the scene with the brightest of lights to provide your team with an Envelope of Safety™.

Intelligent design

Take control of each color with the ability to program up to 3 separate warning modes that you can have correspond to your primary warning with the iLED™. Each mode has the ability to incorporate single, dual, or tri color functions with the built in scene/work/alley override.  Utilizing our patented sealing technology, your lamp will be waterproof and the light directed where you want it without the need for additional bracketry. (US patent no. 8282242 & 8092044)

The warning light function

Safely traversing through busy intersections is a bold move and your lighting should be just as bold! The new iLED™ effectively provides dual and tri color options for your response including on scene safety! Whether on a push bumper, license plate bracket, or anywhere else on the vehicle, the iLED™ will provide an element of safety! The iLED™ includes a black or chrome bezel for a finished, professional look and that  also make the installation easy!

The illumination function

Illumination devicesThe iLED™ is multi modal with a work/scene light override feature. Connect this function to your respective alley, takedown, or flood lighting to illuminate areas that would not have been illuminated before! We will give you the lighting you need to keep you and your community safe.

(Photo: 13degree vertical mount iLED™ and TRX-Tactical light to the front. RECT16’s and the standard Scorpion high power alley lights to the side)



  • Black or Chrome surface mount bezels
  • 5 Year No Hassle Warranty
  • Patented Waterproof Design
  • SAE and CA 13 Compliant
  • Programmable Patterns and Flash Rates
  • Sync with other TOMAR products
  • Program up to 3 different warning modes
  • Programmable single color override

Horizontal Mount

Horizontal mount incorporates a wide-angle footprint bound to get the attention of motorists.


LED light

Vertical Mount

Our engineers designed a wide angle vertical optic that has an output similar to a horizontal lens.


13 Degree Angled Mount

Vertical and Horizontal lens to direct light out at 13 degrees. No angled brackets required!





Instruction Sheet’s for Pre-Programmed iLEDs

Dual iLED Instruction Sheet
Triple iLED Instruction Sheet