Dual Low Current Strobeswitch For Solar/Battery Powered Installations

$817.50

Description

*Please contact us for pricing on this item*

 

HOW IT WORKS: An emergency vehicle uses a special optical emitter to transmit a signal. The TOMAR STROBESWITCH™ receives this signal, and if the signal format is correct, activates its solid-state output relay. The relay output may be used to control security gates, fire department garage doors, and other devices. Signaling is optical by line of sight, and the TOMAR STROBESWITCH™ can operate indoors or outdoors, in bright sunlight, or in any weather. The unit is not susceptible to radio frequency interference, and uses digital frequency discrimination to reject unwanted signals, such as flashlights, emergency vehicle lighting systems, flashing signs, etc.

* Registered trademark of the GTT Corporation.

Catalogs

Specifications

Item Description
Range 200 feet typical, but depends on intensity of strobe emitter
Field of View 10º vertical, 90º horizontal
Signal Acquisition Time 0.64 seconds
Function Indicator The unit has a red LED that illuminates whenever a proper optical signal is received. The LED is visible thru the viewport and can be seen for 25 feet or more. This feature can be used with the optional Hand Held Tester to verify the unit’s operation.
Frequency F14 = 14.035 Hz ± .25 Hz ( high priority )
F10 = 10.000 Hz ± .25 Hz ( low priority )
1790M–2 Power Module 12–24VDC AC/DC
DPDT relay output 2A @ 30VDC, 0.6A @ 120VAC
0–30 minute time delay plus continuous latch mode
Remote reset

Documents