Detector & M3880 Cable

$244.00$1,960.77

Description

The M3880 STROBECOM® confirmation light cable is made specifically as the communication cable between the 2087 Confirmation light driver and the confirmation light (Not required when using the 4140V2 or OSPOCV2 Series cards along with IC Series Detectors). M3880 cable is available in 500, 1000, and 2500 foot reels.
Specifications:
Item Description
Cable Type – Unshielded
Nominal O.D. over jacket – .208” maximum
Conductors Quantity -2
Gauge – AWG #18 (16 x 30) stranding
Conductor Material – tinned copper strands
Insulation – Color-Coded PVC Insulation 0.016″, Gray
PVC Jacket
Electrical Properties Voltage Rating – 300 V rms
Capacitance – 33pf/ft @ 1 kHz, Nominal Conductor
to Conductor
Inductance – 0.18 µH/ft, Noninal
Conductor DCR – 7.1 Ω/1000ft @ 20°C, Nominal
Jacket Minimum average wall thickness – .020″
Temperature rating – -20 to +80 °C (AWM), +75 °C(CM)
Voltage rating – 300V
Material – PVC, Gray

Detector Cable:

Specifications:
Item Description
Cable Type – Shielded
Nominal O.D. over jacket – .35” maximum
Conductors Quantity -3
Gauge – AWG #20 (7 x 28) stranding
Conductor Material – Individually tinned copper strands
Insulation – PVC, 80C, 600V, 25 mil minimum average
thickness
Color -1 Blue, 1 Orange, and 1 Yellow
Shield Aluminized polyester film or approved equal, applied with a nominal 20% overlap to provide 100% shield coverage
Drain Wire Gauge – AWG #20 (7×28) stranding
Material – Individually tinned copper strands
Uninsulated and in contact with the shield conductive surface
Electrical Characteristics Drain and conductor DC resistance shall not exceed 11.0 ohms per thousnd feet
Capacitance from 1 conductor to the other 2 conductors and shield shall not exceed 48 pf/ft at 1000 Hz
Jacket Minimum average wall thickness – .045″
Temperature rating – 80C
Voltage rating – 600V
Material – PVC, Black

Nominal O.D. over jacket – .35″ maximum

Brochures and Catalogs